Hot Rodding Blog
There are a lot of things that we like to talk about but Hot Rods are at the top of the list. Read the hot rod blog and find advice, expert opinions, and discussion from enthusiasts around the world on your favorite vintage and custom cars.
Confused About Mopar Platforms?
Big, Bad Headers From Doug's Headers
|
Posted August 26 2009 08:36 AM by MilesSpeed
Originally designed for the 67-68 factory Cobra Jet Super Stock racers
like Hubert Platt, The original DOUG’S HEADERS D627 tuned long tube
header, is specifically designed to fit 390-428 FE engines in the...
Read full blog
|
Filed under: Project Cars
|
Comments (0)
Spectre Performance Cold Air Intake
|
Posted August 26 2009 08:22 AM by MilesSpeed
In land speed racing, Spectre Performance learned early that airflow management is critical. The speed merchants at Spectre push the limit on the dyno, flow bench, salt flats and tracks across the country to develop...
Read full blog
|
Filed under: Project Cars
|
Comments (0)
Moroso Performance
|
Posted August 25 2009 05:52 PM by Johnny Hunkins
Moroso has taken the guesswork out of fabricating mounts for your alternator and vacuum pump.
Read full blog
|
Filed under: Tech
|
Comments (0)
PerTronix Billet Flame Thrower Distributor
2010 Challenger
|
Posted August 21 2009 03:56 PM by Johnny Hunkins
Hurst brings back its famous silver and black color scheme in today’s hottest pony car.
Read full blog
|
Filed under: Hard Driving
|
Comments (0)
More G's From Your G-body
|
Posted August 21 2009 08:02 AM by MilesSpeed
BMR Fabrication introduces control arm relocation brackets to improve handling of you r G-body.
Read full blog
|
Filed under: Project Cars
|
Comments (0)
Ford's Planned Supercar
|
Posted August 20 2009 01:38 AM by MilesSpeed
The 40th Anniversary 2008 Mustang Cobra Jet more than lived up to its
billing, joining its historic predecessor - the original 1968 Cobra Jet
in winning its inaugural race at the NHRA Winternationals in Pomona,
California.
Read full blog
|
Filed under: Magazine Stuff
|
Comments (0)
COMP Cams
|
Posted August 19 2009 09:04 PM by Johnny Hunkins
COMP launches new lubricant designed for pro engine builders during break-in of new and rebuilt engines.
Read full blog
|
Filed under: Tech
|
Comments (0)
Edelbrock Website Showcases Foundries Capabilities
|
Posted August 19 2009 10:23 AM by ekimball
TORRANCE, CA - Edelbrock is excited to announce the launch of its all-new foundries services website: http://www.edelbrockfoundry.com. Edelbrock has created this website to showcase their foundry capabilities, specializing...
Read full blog
|
Filed under: Hard Driving
|
Comments (0)
Fesler-Moss 2010 Camaros
|
Posted August 19 2009 01:17 AM by MilesSpeed
First, the world waited for upwards of three years, and now the 2010 Camaro is a reality. Then came the promise of an even more powerful, better handling version of the quintessential modern muscle car from the...
Read full blog
|
Filed under: Project Cars
|
Comments (0)
Chrysler Archives
|
Posted August 18 2009 07:32 PM by Johnny Hunkins
In an ill-advised cost-cutting measure, Cerebus pulled the plug on Chrysler’s engineering archives.
Read full blog
|
Filed under: Hard Driving
|
Comments (1)
Pontiac G6 Research
Get updated on all your car buying needs from safety features, to specs, to crash test ratings and options. Get all the information you need if you are interested in buying a new car like the Pontiac G6. The 2010 G6 comes with a L4 standard engine and has a manufacturer suggested retail price of $21,275.00. It has a trade in value of $21,145.00 which should come in handy when you go to shop for your next car. You also might want to research the Lincoln Mark LT and the Chevrolet Camaro.
|
|
|